Knowledge

Appearance difference: both are composed of actuator and valve body. The electric valve limit switch is in the electric installation, while the pneumatic valve limit switch, air source filter and sole

Two way thermostatic valve with high resistance specially designed for double pipe system must be selected for double pipe system. Single pipe system generally adopts low resistance two-way thermostat

The medium filled in the temperature chamber is a low boiling point liquid. When the external temperature rises, part of the liquid vaporizes into gas.

As the thermostatic valve needs to feel the indoor temperature, it must be ensured that the temperature bulb of the thermostatic valve is in a relatively open space with smooth air flow during install

One of the programmable thermostat problems that intelligent thermostats try to solve is the confusing user interface.

Another major function of the intelligent thermostat is its ability to connect to the Internet. The smart thermostat is designed with a WiFi module, which allows the thermostat to connect to the user'

In order to alleviate the problem of human errors related to programmable thermostats, the intelligent thermostat uses a sensor that can determine the occupancy mode, thereby automatically changing th

The intelligent thermostat is a temperature controller, which can be used with home automation and is responsible for controlling the heating, ventilation and air conditioning of the home.

When heat energy moves into an object or space, its temperature rises, increasing the average kinetic energy of its atoms, such as objects and air in a room. Thermal energy leaving an object or space

Setting range of thermostat pressure gauge (5~35 ℃); Thermostat measurement accuracy: ± 1 ℃; Overall dimension of thermostat: 86 × 86(mm).

Plug in type --- the thermostat is installed on the pipe and the sensing element is inserted into the pipe.

When either the autosampler or the thermostatic autosampler is powered on, never disconnect or reconnect the cable between the two components. This will destroy the circuit of the module.