Home - Knowledge - Details

Classification of radiator thermostatic control valves

1) Steam bulb type

The medium filled in the temperature chamber is a low boiling point liquid. When the external temperature rises, part of the liquid vaporizes into gas. The increase of the volume of the temperature chamber pushes the valve stem, and the opening of the valve is reduced to reduce the water inflow into the radiator. When the external temperature decreases, part of the gas liquefies into liquid again. The volume of the temperature chamber decreases, and the opening of the valve increases, thus increasing the water inflow into the radiator. The temperature sensing medium in the temperature chamber is often in a mixed state of gas and liquid, which has the advantage of rapid action time, but has very strict requirements on the sealing of the temperature chamber, and is rarely used in China.

2) Liquid bulb type

The temperature sensing medium filled in the temperature chamber is a special liquid, usually methanol or toluene. This kind of bulb has large volume and short action time, so it is widely used in China.

3) Solid bulb type

The temperature chamber is filled with solid with high expansion coefficient, mostly paraffin. Frequency converter radiator has a relatively small change in the volume of solid heating (cooling) compared with gas and liquid, so its temperature sensing action is relatively slow, but the volume is relatively small compared with the liquid temperature bulb, so it is also partially used in China.

4) Sheet metal type

The temperature sensing device of the thermostatic controller is a special alloy metal sheet with memory function, which drives the temperature control valve to act due to expansion and contraction.

The temperature sensing device of the product needs to be strictly tested and detected. At the same time, the life and accuracy of the temperature sensing device will be affected because the metal has fatigue fracture and other characteristics change problems after frequent expansion and bending, and the metal has ductility.


Send Inquiry

You Might Also Like