Home - News - Details

New Requirements For Sockets

1、 Add a protective door: It is mandatory to set a protective door for the socket of the patch panel to prevent direct contact between the conductive metal inside the socket and the external conductive foreign matter, and to avoid electric shock accidents caused by the accidental contact of children with fingers or metal objects. 2、 Power cord thickening: for extension cord socket with rated current of 10A, the minimum cross-sectional area of the conductor is increased from 0.75 mm2 to 1 mm2; The rated 16A is increased from 1 mm2 to 1.5 mm2. The bearing capacity of the socket is improved, and the safety accidents caused by cable overload are reduced. 3、 Improvement of flame retardancy of materials: the new national standard adds the detection items of needle flame test. The so-called needle flame experiment is to use a needle flame open flame to contact the patch panel for 30 seconds, which requires that the platoon cannot ignite, or it will automatically extinguish 30 seconds after the ignition. The requirements for socket insulation materials are increased, and the ABS shell does not meet the new requirements. 4、 Product name change and mandatory 3C certification requirements: the unified specification of product name is that the product with line is an extension line socket, and the product without line is a mobile socket converter. It is mandatory that the product must obtain 3C certification and be indicated on the package.


Send Inquiry

You Might Also Like