2-way Electric Valve
2way DN15 Internal Thread/DN15 External Thread
Electric fan coil valve,works with actuator or thermostat head
Description
Xiamen Hysen Control Technology Co., Ltd. is one of the most credible manufacturers and suppliers of 2-way electric valve in China, also supports customized service. Please feel free to wholesale discount 2-way electric valve from our factory.
Production Introduction
Brass 2-way Electric Valve is intended for zone control systems together with the thermal actuators. The valve can control water flow to cooling as well as heating batteries, such as radiators, convectors, chilled ceilings etc.
Product Specifications
Body Size: | DN15/DN20/DN25 |
Body Type: | 2-way/3-way |
Max.diff.pressure: | 200 kPa /100 kPa /62 kPa |
Contact capacity: | M30 x 1.5mm |
Permissible Media: | Chilled Water, water with anti-freeze |
Body material: | Brass |
Product Feature
Material: Selected high quality brass
Advanced production technology: high temperature forging, integrated forming.
Fashion appearance: raw material pouring, beautiful appearance.
Product Application
2-way electric valve suitable for controlling the opening or closing of cold water or hot water air conditioning system pipes to achieve the purpose of controlling room temperature. The actuator is driven by paraffin wax, and the invention of spring return, the valve does not work in the normally closed state. When it is necessary to work, the thermostat provides an open signal to make the electric valve switch on the AC power supply and operate. When the valve is opened, chilled or hot water enters the fan coil to provide cool or warm air to the room. When the greenhouse reaches the temperature controller, the thermostat disables the electric valve, and the return spring closes the valve, thus cutting off the flow of water into the fan coil. Open through valve close. Keep the room temperature within the set temperature range of the thermostat.
Packing Listing
1 pc Angle Valve
1 pc User Manual
FAQ
Installation Site Information
The valve installation site should be easily accessible and provide sufficient room for service and removal of actuators. Manual shut-off valves should be located up and downstream of the control valve, to facilitate service and repairs without drainage of the piping system. The control valve should preferably be installed in vertical or horizontal position.
Hot Tags: 2-way electric valve, 2-way electric valve manufacturers, suppliers, Electric Three Way Valve, Brass Valve, Electric Actuator Valve, 2 way Electric Valve
Send Inquiry
You Might Also Like
