Difference Of Floor Heating
Leave a message
Heat transfer mode
Both dry floor heating and wet floor heating are radiation.
Energy saving degree
Dry floor heating is very energy-saving, which is generally about 25% less than radiator.
Wet floor heating is very energy-saving, generally about 25% less than radiator.
Heating time
The heating effect of dry floor heating is very fast. Generally, the heating time is 20-30 minutes, which is equivalent to the radiator.
The heating effect of wet floor heating is very slow, and the heating time is very long, which generally takes 4-6 hours.
Easy to install
The installation of dry floor heating is very convenient for construction, and it is generally installed before floor laying.
Wet floor heating is multi-layer composite, fixed coil, and ground pouring. The process is more complex than that of dry floor heating, which is generally installed in the early stage of decoration.
. Floor comfort
The dry floor heating insulation layer is softer than the cement floor, and the floor is directly paved on it, which makes the foot feel more comfortable.
Compared with dry floor heating, wet floor heating has a harder foot feel, but the bearing weight per square meter of the ground is higher than dry floor heating.
Investment cost
Dry floor heating is equivalent to imported radiator heating, about 25% higher than general wet floor heating.
Wet floor heating is generally equivalent to ordinary radiator heating, and the cost of concrete backfill layer is equivalent to the cost of mid-range heating.
market share
The dry floor heating project is blank, and the household decoration covers less than 10% of the heating area.
The market share of wet floor heating is more than 90%.
Building bearing
The dry floor heating module is made of light materials, which is very light, and its bearing is about 30% lower than that of radiator
The average weight of wet floor heating is very heavy because it must be poured with sand and gravel concrete layer, which is about 8 times heavier than that of radiator
