How are boiler and radiators heated

The combination of wall bolier and radiator is explained in detail
Now there are many families choose the family independent heating system, generally using the combination of boiler and radiator, can not only for home heating, but also to provide domestic hot water, kill two birds with one stone, easy to operate, energy saving and practical. However, after all, this heating method is still short time into our country, many people are not familiar with it, don't understand it, and don't know how to install.

Step 1: Measure and design the plan
Under normal circumstances, the heating designer needs to carry out field measurement to the user's home, according to the heating needs of the user and the characteristics of the design of heating scheme, and communicate with the user to confirm the type of radiator, style, water in and out of the way and the specific installation position.

Step 2: Lay heating pipes
Heating pipeline laying is divided into open and dark installation, open installation refers to the pipeline are exposed to the outside, dark installation is the pipeline is hidden in the ground, the ceiling inside. In order to achieve the best heat dissipation effect, occupy less indoor space as far as possible, present a beautiful decorative effect, reasonable arrangement of radiator position, pipeline routing is very necessary, professional designers will try to make the pipeline laying more reasonable, more hidden.

Step 3: Install radiator
When installing the radiator, place the radiator smoothly, connect the valve connector with the inlet and outlet valve, use a level to measure whether the radiator is straight, whether the pipeline installation meets the requirements, and then use pipe pliers to tighten the connector.

Step 4: Install the boiler
The boiler is the source of heat source, need to be placed in the place where there is water source, gas source, but should pay attention to the installation and open line and electrical equipment separated, also can not put flammable and explosive items around it, specifically, the boiler and gas meter and gas stove distance should be more than 300mm.