Wireless Programmable Thermostat And Receiver
HY09RF/HY09RF WIFI (with multiple receivers)
Application: for Electric floor heating, infrared heater
Feature:
Thermostat can be wall mounted or used with supplied table stand
With multiple receivers
Sensor calibration
Holiday mode
Size:130*90*25mm
Description
Xiamen Hysen Control Technology Co., Ltd. is one of the most credible manufacturers and suppliers of wireless programmable thermostat and receiver in China, also supports customized service. Please feel free to wholesale discount wireless programmable thermostat and receiver from our factory.
Production Introduction
Wireless Programmable Thermostat and Receiver is a Radio Frequency battery-powered programmable room thermostat with larger touch-screen controls that provide six timed temperature periods every 24 hours.It has a large blue backlight display and a pre-programmed user-adjustable temperature profile.
Product Specifications
Power: | 90-240Vac 50/60Hz |
Type | Tuya smart thermostat |
Display accuracy: | 0.5°C |
Programmable | 5+2/6+1/ 7 days |
Contact capacity: | 3A(WW/LD); 16A(WE) |
Limit temperature range: | 1~70°C |
Range of temperature adjustment: | 5~35°C |
Insulating condition: | Normal environment |
Probe sensor: | NTC(10k)1% |
Output: | Switch relay |
Installation: | recessed type (in the wall) |
Size(mm)： | 130*130*25mm |
Product Feature
1.EASY TO USE - Efficient control, simple operation, no learning curve or programming required, big high contrast display with easy-to-read characters. Our thermostat includes a wall mounting backplate.The control set is pre-linked in the factory and uses a license-free 433 MHz frequency.
2. SETING TEMPERATURE - Heating control capability with a set point range of 5°C to 35°C and a visible demand indication.Change the temperature with a gentle touch, without the need for knobs or buttons.
3.Large, easy to read LCD with blue back light
4.Power: Receiver:230Vac 50/60HZ Thermostat: USB power supply/4*AAA Batteries.
Product Application
Contact capacity: 16A/250V(WE)
Installation: Wall mounted or on battery seat
FAQ
Transceiver tips:
1-Power light (green light):
a) The green light bright when power on
b)The green light flashing when controller standby
2-Load light/fault light (red light):
A)Red light bright when load output
B)Red light out when no load output
3-Wireless Signal light(orange light)
Orange light flashing when received wireless signal
4-WiFi singal light (blue light)
1) Fast blink: EZ pairing mode
2) Slow blink: AP pairing mode
3) Long bright when the wifi paring successful
*Wireless module weld abnormal: Yellow light flashing
*Wireless module breakdown: Yellow and red light flashing together
*High temperature alarm: The red light blink 2 times
*Wireless signal breakdown: The red light blink 3 times it does not receive
wireless signal for 1 hour
*NTC fault: The red light blink 4 times
Hot Tags: wireless programmable thermostat and receiver, wireless programmable thermostat and receiver manufacturers, suppliers, Wifi Thermostat for Underfloor Heating, Wifi Thermostat Underfloor Heating, Underfloor Heating Wifi Control, Wireless Programmable Thermostat And Receiver, Wireless Underfloor Heating, Wireless Underfloor Heating Thermostat
Send Inquiry
You Might Also Like
